MTFC4GACAJCN-4M IT Micron Flash Memory Datasheet & Specs
Prof. David Reynolds
Published:April 27, 2024
NAND flash memory is a crucial component in modern electronic devices, providing nonvolatile storage for data and code. NAND flash memory has evolved significantly since its introduction, becoming one of the most widely used forms of nonvolatile storage in modern electronics. Its significance lies in its ability to offer high-density storage in a compact form factor, making it ideal for use in devices where space is limited. The MTFC4GACAJCN-4M IT NAND flash memory is a specific variant known for its reliability and performance. In this article, we will explore the MTFC4GACAJCN-4M IT specifications, pin configuration, applications, datasheet, and more details about this flash memory.
Overview of MTFC4GACAJCN-4M IT
The MTFC4GACAJCN-4M IT is a 32-bit eMMC NAND flash memory chip manufactured by Micron Technology. It is housed in a 153-ball VFBGA package. Micron's e.MMC combines a NAND Flash component and a controller on an advanced 11-signal bus, compliant with the MMC system specification. This chip is well-suited for industrial applications such as infrastructure, networking equipment, PCs, servers, and other industrial products due to its compact package sizes, high reliability, and cost-effectiveness. The nonvolatile e.MMC requires no power to maintain stored data, offers high performance across a wide range of operating temperatures, and is resistant to shock and vibration.
MTFC4GACAJCN-4M IT Features
- Combines MultiMediaCard (MMC) controller and NAND Flash
- Comes in a 153-ball FBGA package (RoHS compliant, "green package")
- Compliant with JEDEC/MMC standard version 5.0 (JEDEC Standard No. JESD84-B50)
- Features an advanced 12-signal interface
- Supports x1, x4, and x8 I/Os, selectable by host
- Supports SDR/DDR modes with clock speeds up to 52 MHz
- Supports HS200/HS400 modes
- Includes a real-time clock
- Supports various command classes such as class 0 (basic), class 2 (block read), class 4 (block write), class 5 (erase), class 6 (write protection), and class 7 (lock card)
- Offers temporary write protection
- Supports boot operation (high-speed boot)
- Includes sleep mode
- Features replay-protected memory block (RPMB)
- Supports secure erase and secure trim
- Includes hardware reset signal
- Supports multiple partitions with enhanced attributes
- Offers permanent and power-on write protection
- Supports high-priority interrupt (HPI)
- Supports background operation
- Provides reliable writing capabilities
- Supports discard and sanitize operations
- Offers extended partitioning
- Includes context ID and data TAG features
- Supports packed commands
- Features dynamic device capacity
- Backward compatible with previous MMC versions
- Includes cache
- Supports field firmware update (FFU)
- Includes Device Health Report feature
- Provides sleep notification
- Offers power-off notification
- Implements ECC and block management
MTFC4GACAJCN-4M IT Specifications
| Type | Parameter |
| Technology | FLASH - NAND |
| Memory Size | 4 GB |
| Configuration | MLC |
| Sequential Read | 160 MB/s |
| Sequential Write | 14 MB/s |
| Supply Voltage | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Memory Type | Non-Volatile |
| Package / Case | 153-VFBGA |
MTFC4GACAJCN-4M IT Pinout
MTFC4GACAJCN-4M IT CAD Model
MTFC4GACAJCN-4M IT Symbol
MTFC4GACAJCN-4M IT Footprint
MTFC4GACAJCN-4M IT 3D Model
MTFC4GACAJCN-4M IT Block Diagram
Advantages of MTFC4GACAJCN-4M IT
- High-speed Data Transfer Rates: The MTFC4GACAJCN-4M IT NAND flash memory offers high-speed data transfer rates, allowing for quick access to stored data and faster performance in electronic devices.
- Large Storage Capacity: With a capacity of 4GB, the MTFC4GACAJCN-4M IT provides ample storage space for storing a variety of data, including operating systems, applications, and media files.
- Low Power Consumption: The MTFC4GACAJCN-4M IT is designed to consume minimal power, making it energy-efficient and suitable for use in battery-powered devices.
- High Reliability and Durability: NAND flash memory is known for its reliability and durability, allowing the MTFC4GACAJCN-4M IT to withstand the rigors of daily use in electronic devices.
MTFC4GACAJCN-4M IT Application
Embedded systems and IoT devices
The MTFC4GACAJCN-4M IT NAND flash memory is commonly used in embedded systems and Internet of Things (IoT) devices for storing firmware, operating systems, and data logs. Its high storage capacity and reliability make it ideal for these applications.
Consumer electronics such as smartphones and tablets
In smartphones and tablets, the MTFC4GACAJCN-4M IT is used to store apps, photos, videos, and other multimedia content. Its fast read and write speeds ensure smooth performance and efficient data transfer.
Automotive infotainment systems
Automotive infotainment systems rely on NAND flash memory for storing maps, music, and other multimedia content. The MTFC4GACAJCN-4M IT's durability and resistance to temperature variations make it suitable for use in automotive environments.
Industrial automation and control systems
Industrial automation and control systems use NAND flash memory for storing critical data and firmware. The MTFC4GACAJCN-4M IT's high endurance and reliability make it well-suited for these demanding applications.
MTFC4GACAJCN-4M IT Package
MTFC4GACAJCN-4M IT Manufacturer
Micron Technology Inc. is a prominent manufacturer of memory and storage solutions, renowned for its cutting-edge products and innovations in the semiconductor industry. Specializing in dynamic random-access memory (DRAM), NAND flash memory, and solid-state drives (SSDs), Micron serves a wide array of markets, including consumer electronics, automotive, networking, and enterprise. The company's commitment to advancing technology is evident in its development of high-performance, high-capacity memory solutions that power the world's most demanding applications. Micron's dedication to quality and innovation has established it as a leader in the semiconductor industry, driving progress and shaping the future of memory and storage technology.
MTFC4GACAJCN-4M IT Datasheet
Download MTFC4GACAJCN-4M IT Datasheet PDF.
Conclusion
In conclusion, the MTFC4GACAJCN-4M IT NAND flash memory is a reliable, high-performance storage solution suitable for a wide range of electronic devices. With its large storage capacity, high-speed data transfer rates, low power consumption, and high reliability, the MTFC4GACAJCN-4M IT offers significant benefits for various applications. Whether used in smartphones, tablets, digital cameras, or industrial devices, the MTFC4GACAJCN-4M IT provides efficient and reliable storage, ensuring smooth operation and optimal performance.
Read More
FAQ
-
What is the MTFC4GACAJCN-4M IT NAND flash memory used for?
MTFC4GACAJCN-4M IT NAND flash memory is used for storing data in a wide range of electronic devices, including smartphones, tablets, digital cameras, and solid-state drives (SSDs). It is commonly used for its high storage capacity, fast read and write speeds and durability.
-
What is the storage capacity of MTFC4GACAJCN-4M IT?
The MTFC4GACAJCN-4M IT NAND flash memory has a storage capacity of 4GB.
-
What is the typical power consumption of MTFC4GACAJCN-4M IT?
The typical power consumption of MTFC4GACAJCN-4M IT varies depending on the operation mode and usage scenario. However, it is designed to be energy-efficient, making it suitable for battery-powered devices.
-
Are there any special considerations when using MTFC4GACAJCN-4M IT in industrial applications?
When using MTFC4GACAJCN-4M IT in industrial applications, it is important to consider factors such as temperature range, shock and vibration resistance, and long-term reliability. Ensure that the device meets the specific requirements of your industrial application.
Still, need help? Contact Us: [email protected]