HS9-26CLV32RH-Q

The Intersil HS-26CLV32RH, HS-26CLV32EH are radiation hardened 3. 3V quad differential line receivers designed for digital data transmission over balanced lines, in low voltage, RS-422 protocol applications. Radiation hardened CMOS processing assures low power consumption, High-Speed, and reliable operation in the most severe radiation environments. The HS-26CLV32RH, HS-26CLV32EH have an input sensitivity of 200mV (typical) over a common-mode input voltage range of -4V to +7V. The receivers are also equipped with input fail-safe circuitry, which causes the outputs to go to a logic “1” when the inputs are open. The device has unique inputs that remain high impedance when the receiver is disabled or powered-down, maintaining signal integrity in multi-receiver applications. Specifications for Rad Hard QML devices are controlled by the Defense Logistics Agency Land and Maritime (DLA). The SMD numbers listed must be used when ordering.

Key Features

• Electrically screened to SMD # 5962-95689
• QML qualified per MIL-PRF-38535 requirements
• 1.2 micron radiation hardened CMOS
• Total dose: 300krad(Si) (max)
• Single event upset LET: 100MeV/mg/cm²)
• Single event latch-up immune
• Low stand-by current: 13mA (max)
• Operating supply range: 3.0V to 3.6V
• Enable input levels: V_IH > 0.7 x V_DD; V_IL < 0.3 x V_DD
• CMOS output levels: V_OH > 2.55V; V_OL < 0.4V
• Input fail-safe circuitry
• High impedance inputs when disabled or powered-down
• Full -55°C to +125°C military temperature range
• Pb-free (RoHS compliant)