GLS29EE010-70-4C-PHE

Key Features

• Industry Standard Serial ATA (SATA) Host Interface
• - SATA 1.5 Gb/s or SATA 3.0 Gb/s 1)
• - ATA/ATAPI-8 compliant
• - Supports 48-bit address feature set
• Performance
• - Sequential data read -
• Up to 110 MByte/sec
• - Sequential data write -
• Up to 60 MByte/sec
• measured using 128 KByte transfer size
• Power Management
• - 3.3V and 1.2Vpower supply
• - Host SATA interface power management
• - Immediate disabling of unused circuitry without host intervention
• Power Specifications 2)
• - Active mode:
• 820mW typical (GLS85LS1064B)
• 565mW typical (GLS85LS1032B)
• 440mW typical (GLS85LS1016B)
• 360mW typical (GLS85LS1008B)
• 360mW typical (GLS85LS1004A)
• 360mW typical (GLS85LS1002A)
• - Idle / Standby mode: 210mW typical
• - Sleep mode: 70mW typical
• Expanded Data Protection
• - Added data security through user-selectable protection zones
• Integrated Voltage Detector
• - Detects supply voltage fluctuations and generates reset during power-up and power down to prevent inadvertent writes
• Supports SMART Commands
• 20-Byte Serial Number
• - Factory pre-programmed 10-Byte unique ID
• - User-programmable 10-Byte ID
• Robust Built-in ECC
• NAND Configuration
• - 2 bits per cell (MLC)
• Temperature Range
• - Commercial: 0°C to 70°C
• - Industrial: -40°C to 85°C
• FBGA package
• - 14.0 mm x 24.0 mm x 1.95 mm, 145-ball, 1.0 mm ball pitch, FZJE
• All Devices are RoHS Compliant
• 1) Current product revision supports SATA Revision 1.x with host transfer rate of up to 1.5 Gb/s (i.e. SATA 1.5 Gb/s).
• SATA 3.0 Gb/s refers to SATA Revision 2.x and will be supported by our planned future product revisions.
• 2) For management of the Sleep Mode, refer to “SATA NANDrive Application Design Guide.”