FT4232HQ-REEL

USB-UART/MPSSE, 2232, QUAD, 64QFN; Bridge Type:USB to UART, MPSSE; Supply Voltage Min:1.62V; Supply Voltage Max:1.98V; IC Case / Package:QFN; No. of Pins:64Pins; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; MSL:- RoHS Compliant: Yes

Key Features

• Single chip USB to quad serial ports with a variety of configurations
• Entire USB protocol handled on chip, no USB specific firmware programming required
• USB 2.0 high-speed (480Mbps) and full-speed (12Mbps) compatible
• Two multi-protocol synchronous serial engine (MPSSE) on channel A and channel B
• Independent baud rate generators
• RS232/RS422/RS485 UART transfer data rate up to 12Mbaud (RS232 Data Rate Limited)
• FTDI's royalty-free virtual com port (VCP) and direct (D2XX) drivers
• Optional traffic TX/RX indicators can be added with LEDs and an external 74HC595 shift register
• Adjustable receive buffer timeout
• Support for USB suspend and resume conditions via PWREN#, SUSPEND# and RI# pins
• Highly integrated design
• FTDI FT232B style, asynchronous serial UART interface option
• Fully assisted hardware or X-On/X-Off software handshaking
• UART interface supports 7/8-bit data, 1/2 stop bits and odd/even/mark/space/no parity
• Auto-transmit enable control for RS485 serial applications using TXDEN pin
• Operational configuration mode and USB description strings configurable in external EEPROM over USB
• Low operating and USB suspend current
• Configurable I/O drive strength (4, 8, 12 or 16mA) and slew rate
• Supports bus powered, self powered and high-power bus powered USB configurations
• UHCI/OHCI/EHCI host controller compatible

Application

• Computers & Computer Peripherals
• Audio
• Sensing & Instrumentation
• Industrial
• Automation & Process Control