5P49V5901A000NLGI8

The IDT 5P49V5901 is low-power programmable clock generator with best-in-class jitter performance and design flexibility with universal outputs capable of generating any output frequency. The 5P49V5901 is intended for high performance consumer, networking, industrial, computing, and data-communications applications. Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I2C interface. This is IDTs fifth generation of programmable clock technology (VersaClock 5).The frequencies are generated from a single reference clock or crystal input. A glitchless manual switchover function allows one of the redundant clock inputs to be selected during normal operation. Two select pins allow up to 4 different configurations to be programmed and accessible using processor GPIOs or bootstrapping. The different selections may be used for different operating modes (full function, partial function, partial power-down), regional standards (US, Japan, Europe) or system production margin testing. The device may be configured to use one of two I2C addresses to allow multiple devices to be used in a system.

Key Features

• 4 differential outputs LVPECL, LVDS, HCSL - or 8 LVCMOS outputs
• In-system programmable with 4 independent Output Frequencies
• Up to 350 MHz input/output frequencies
• Also supports crystal input
• Stores 4 different configurations in OTP non-volatile memory
• < 100 mW core power (at 3.3V)
• < 0.7 ps RMS phase jitter (typ)
• Meets PCIe® Gen1/2/3, USB 3.0, 1/10 GbE clock requirements
• 1.8 / 2.5 / 3.3V core and output voltages
• 4x4 mm 24-ld VFQFPN
• -40° to +85°C operating temperature range
• Supported by IDT Timing Commander™ software tool