TLC252CP

Designed for ease of integration into existing designs, the TLC252CP is a practical and efficient solution for low power operational amplifier needs. Its low quiescent current per channel further enhances its suitability for battery-powered applications, ensuring minimal power consumption without compromising on performance

Key Features

• Bluetooth™ specification compliance: V1.1 and V1.2
• Ericsson Licensing Technology Baseband Core (EBC)
• Point-to-point, point-to-multi-point (up to 7 slaves) and scatternet capability
• Asynchronous Connection Oriented (ACL) logical transport link
• Synchronous Connection Oriented (SCO) link: 2 simultaneous SCO channels
• Support Pitch-Period Error Concealment (PPEC)
• – Improves speech quality in the vicinity of interference
• – Improves coexistence with WLAN
• – Works at receiver, no Bluetooth implication
• Adaptive Frequency Hopping (AFH): hopping kernel, channel assessment as Master and as Slave
• Faster Connection: Interlaced scan for Page and Inquiry scan, first FHS without random back off, RSSI used to limit range
• Extended SCO (eSCO) links
• HW support for packet types
• – ACL: DM1, 3, 5 and DH1, 3, 5
• – SCO: HV1, 3 and DV
• – eSCO: EV3, 5
• Clock support
• – System clock input (digital or sine wave) at 13, 26, 19.2 or 38.4 MHz
• – LPO clock input at 3.2, 16.384, 32 or 32.768 kHz
• ARM7TDMI CPU
• – 32-bit Core
• – AMBA (AHB-APB) bus configuration
• Patch RAM capability
• Memory organization
• – On chip RAM, including provision for patches
• – On chip ROM, preloaded with SW up to HCI
• Communication interfaces
• – Fast UART
• – PCM interface
• – 4 programmable GPIOs
• – External interrupts possible through the GPIOs
• – Fast master I2C interface
• Efficient support for WLAN coexistence in collocated scenario
• Ciphering support up to 128 bits key
• Software support
• – Lower level stack (up to HCI)
• – HCI Transport Layer: H4 (including proprietary extensions)
• – HCI proprietary commands (e.g. peripherals control)
• – Single HCI command for patch/upgrade download
• Single power supply with internal regulators for core voltage generation
• Supports 1.65 to 2.85 Volts IO systems
• Total number of external components limited to 7 (6 decoupling capacitors and 1 filter) thanks to:
• – Fully integrated synthesizer (VCO and loop filter)
• – Integrated antenna switch
• – Low IF receiver
• Auto calibration (VCO, Filters)
• No need for calibration of the RF part
• Timer and watchdog
• Power class 2 compatible
• Ultra low power architecture with 3 different low power levels:
• – Sleep Mode
• – Deep Sleep Mode
• – Complete Power Down Mode
• Software Initiated Low Power Mode
• Dual Wake-up mechanism: initiated either by the Host or by the Bluetooth device
• Standard TFBGA-84 pins package